SEAL GUARD Stone Clean 1 litre

Description

SEAL GUARD Stone Clean

SEAL GUARD Stone Clean is a high-quality, highly concentrated liquid cleaner based on natural soaps and specialist cleaning and care ingredients. It is mildly alkaline and contains no waxes or solvents. Stone Clean is gentle on the skin, low-foaming, fresh-smelling, biodegradable and economical to use.

Stone Clean leaves a very thin, antistatic, dirt-repellent maintenance film without building up layers. Regular use brings out the surface’s colour and texture. It also makes the surface more resistant to dirt and stains and easier to maintain. Stone Clean supports the protection of surfaces treated with SEAL-GUARD® penetrating sealers.

Applications

For routine cleaning of stone surfaces, including marble, granite, travertine, slate, limestone, Belgian blue limestone, sandstone, basalt, quartzite, terrazzo, concrete paving, porcelain tiles, glazed ceramic tiles, terracotta, sawn clay pavers and cement tiles. Suitable for polished, honed and rough surfaces, whether impregnated, sealed or untreated. Its controlled foaming also makes it suitable for scrubber-dryers and wet vacuum cleaners.

Dilution

Add 25–50 ml of Stone Clean to 10 litres of mopping water. Use slightly more for the first treatment and on porous or heavily soiled surfaces. For a glossy finish, the dose can be increased to 200 ml per 10 litres of water.

Directions

First test an inconspicuous area. Dilute Stone Clean, preferably with lukewarm water, and mop or scrub the floor by hand or machine. Remove or vacuum up the loosened dirt. Do not rinse the remaining damp film with clean water. The dry floor may be buffed if desired.

Coverage

Approximately 10 litres of diluted SEAL GUARD Stone Clean per 100 m².

Use with

Works well with SEAL-GUARD® Gold Label penetrating sealer and SEAL-GUARD® All Clean cleaner.

Storage

Store in the original, tightly closed container in a cool, well-ventilated place. Protect from freezing.