SEAL-GUARD® All Clean 1 litre

Description

SEAL-GUARD® All Clean

SEAL-GUARD® All Clean is a powerful, mildly alkaline, solvent-free cleaner. Its balanced combination of dirt-dissolving and cleaning ingredients is suitable for soiled old and new stone surfaces. All Clean is designed to remove light cement haze, limescale, oil and grease, floor care residues and general dirt.

Applications

Suitable for natural stone, cement tiles, sawn clay pavers indoors, granite, slate, sandstone, quartzite, terrazzo, concrete paving, porcelain tiles, glazed ceramic tiles and terracotta. As All Clean is acid-free, it can also be used on calcareous natural stones such as marble, travertine, limestone and Belgian blue limestone, and on basalt. It binds limescale without attacking the surface and is suitable for indoor and outdoor use.

Dilution

Dilute All Clean at a ratio of 1:2 to 1:10, depending on the level of soiling.

Directions

First test an inconspicuous area. Pre-wet the surface with water. Apply diluted All Clean and spread with a brush or pad. Leave for 5–10 minutes, without allowing it to dry. Scrub thoroughly, then rinse carefully with clean water. For heavy soiling, treatment can be repeated on a dry surface.

Coverage

Approximately 10–30 m² per litre, depending on the level of soiling.