Seal Guard set – All Clean, Gold Label and Stone Clean

Description

Complete Seal Guard set

This complete set contains three 1-litre bottles for cleaning, protecting and maintaining tiles and natural stone.

1. SEAL-GUARD® All Clean – cleaner

A powerful, mildly alkaline, solvent-free cleaner. All Clean removes light cement haze, limescale, oil, grease, floor care residues and general dirt from old and new stone surfaces. Suitable for natural stone, cement tiles, granite, slate, sandstone, terrazzo, ceramic tiles and calcareous natural stone, among others. Dilute at a ratio of 1:2 to 1:10, depending on the level of soiling.

2. SEAL-GUARD® Gold Label – penetrating sealer

Quick-drying, durable and invisible protection for tiles, grout, masonry and natural stone. Apply Gold Label undiluted in a thin, even coat to a clean, dry surface. One coat is usually sufficient; a second coat is recommended for porous surfaces and areas with heavy foot traffic.

3. SEAL GUARD Stone Clean – maintenance

A highly concentrated maintenance cleaner based on natural soaps. Stone Clean is mildly alkaline, biodegradable and suitable for routine cleaning of stone surfaces. It helps bring out colour and texture and makes the surface more dirt-repellent and easier to maintain. Add 25–50 ml to 10 litres of mopping water and do not rinse afterwards with clean water.

Contents

• 1 litre SEAL-GUARD® All Clean
• 1 litre SEAL-GUARD® Gold Label
• 1 litre SEAL GUARD Stone Clean